Click image to view full size image
Cold Shrink End Caps
Model Number: SB-WCSEC
Cold shrink end caps are made of EPDM rubber, can meet a variety of configuration requirements. Offering sealing protection over multi-core cable ends. Used to seal cable during installation or storage, protecting cable ends.
Cold Shrink End Caps protect cables, pipes and other cylindrical objects from exposure to moisture, contamination, corrosion, ozone, ultra-violet radiation, physical contact and other environmental hazards.
·Simple and fast installation, no tools required, no training required for installation.
·Accommodating size ranges from 13mm ~ 70mm.
·Sealing tight, high rebound even after prolonged years of aging and exposure.
·No mastic or tape required. No torches or heat required.
·Resists fungus, acids, alkali and ozone, Water-resistance.
·Easily removed.
ID as Supplied (Min) (mm) |
ID after Recovered (Max) /mm |
Wall Thickness after Recovered (±0.1mm) |
Application Range (mm) |
Length(mm) |
Ø20 |
12 |
2.5 |
Ø13- Ø16 |
70±5 |
Ø28 |
16 |
2.5 |
Ø18- Ø24 |
70±5 |
Ø47 |
23 |
2.6 |
Ø25- Ø38 |
70±5 |
Ø80 |
46 |
2.6 |
Ø48- Ø70 |
70±5 |
Property |
Test Method |
Standard Value |
300% Modulus |
ASTM D-412-75 |
4.2MPa |
Ultimate Tensile |
ASTM D-412-75 |
10.05MPa |
Ultimate Elongation |
ASTM D-412-75 |
600% |
Tear strength |
ASTM D-624C-73 |
28.3KN/m |
Fungus Resistance |
ASTM G-21 |
28 days exposure No Growth |
Moisture Absorption 7 days@ 90ºC in H2O |
|
3.0% wt. Gain |